Goodbye, Robin Hood Path Racer

From the final ride, 8 July 2021. Minolta Freedom Tele/Kodak Ultramax 400

My Robin Hood path racer came into being on a whim. In 2016 I was given a couple old Raleigh three speeds plus a bare Robin Hood frame. I managed to move the two bikes, but the Robin Hood frame sat for a year since I didn’t know what to do with it. Finally I decided to build it up for myself and make in the style of a path racer–a mid-century British creation of stripped down raciness. I had done that to a Rudge a half-decade earlier. I loved the Rudge, but it was too small so it didn’t see the use it should have. Over fall and winter of 2017-8 Steve M and myself built up the Robin Hood with gathered parts and then I had a fun and sporty machine.

I rode the Robin Hood a bunch in 2018 and even took it with me to Lake Pepin. But the usage of the bike had diminished over the past couple years. It’s the stripped-down “fun” bike, so it’s not great for day-to-day errands. As such, I saved it for fun rides. But practicality trumps superficiality, and I would grab the Raleigh Superbe, Schwinn Heavy Duti, or Raleigh Crested Butte for the day-to-day stuff. And there’s always been some issues: janky fenders that would constantly rub, a wheel that moved in the rear dropouts if too much torque applied. I sent the bike to Jer over the winter to address those issues.

Still, besides some fun rides like a cruise to Powell Butte in March, I have barely ridden the Robin Hood. It’s been staring at me in the bike space, looking forlorn. So finally on Thursday July 8th I decided to pull it out and take a cruise. And…it didn’t feel that fun riding it. Huh. I pressed on, feeling I needed to give the bike a chance.

This chance was not to happen.

After about five miles, I noticed that something was rubbing in the rear again. Every time I stopped to look at it, the wheel was perfectly centered. I guessed that it might be coming out of the dropouts again when enough torque was applied. Jer told me that he did the best he could, but the dropouts were widened and deformed. I was hoping that I could at least finish the ride, but every time I started from a stop, that rub happened again, dragging my rear wheel against the chainstays. I started to walk across intersections. This was not good. Finally, the chain popped off. That was it. I was done. I walked the bike to the bus stop and knew it was over.

Sure, I could see about fixing it again, but it’d just be another band aid, a short-term solution. Sure, I could bring it to a framebuilder with the hope of a more substantial fix, but do I really want to go that route? This was a free frame that I built up on a whim. Path racers are fun…for a bit. The Rudge lasted a little under three years, this one got a bit more play since the frame fit me better. But it turns out I like the classic upright Superbe riding position instead.

So it’s the end of the road for the Robin Hood. I had some good times. But after getting rid of the Crested Butte, I’m liking the idea of a smaller fleet. I’ll still have three bikes, enough to suit my needs. Maybe I’ll build a path racer again at some point if I get the urge, just like another vintage mountain bike could enter the fleet. That’s way down the road. Right now I’m not that interested in spending the time, energy, and money in building up bikes. If I did I’d look for a lighter frame. I’ll be stripping down the Robin Hood and transferring some parts to other bikes and selling the rest. It’s not the most noble end to a bike (see my Raleigh Wayfarer) but the Robin Hood will be leaving me the same way it arrived.

For photos of the Robin Hood over the years, see the dynamic flickr album below. Or click here.

Robin Hood Path Racer at Sewage Treatment Plant Bridge. 28 Sept 2020

5 thoughts on “Goodbye, Robin Hood Path Racer

Add yours

  1. It is so hard to get rid of bicycles. However the bad dropout would be a deal breaker. I have four bicycles but one has a broken rim right now. I love riding all four so not thinking about getting rid of one. I congratulate you on your steel resolve in this matter. Maybe I should consider thinning the ranks a little more too.

  2. I had a local frame builder build up the dropouts on my Raleigh Superbe Sports Tourist with brass. The dropouts were pretty well rounded out, and it was clear, someone, at some point in the last seventy years, had ridden it quite a bit without the proper – whatever those eared washers are called that are supposed to be there. He charged me about $115 for the work. He said it was more difficult than he had anticipated, but the work has held up well. It might be good advice to pass on to the next owner.

    1. Since I’m going to part out the bike, all that will be left is the frame. It may end up going to the scrapper, but may go to the co-op if they want.

I love to hear from you! Please note that all comments are manually moderated. I usually approve comments within 48 hours.

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Create a free website or blog at WordPress.com.

Up ↑

%d bloggers like this: